AISI 4145H Mod Integral Blade Stabilizer Forging

TIPTOP Drilling stabilizer is made from a forged piece of 4145 H Mod material or non magnetic material, which is also an important tool to prevent deviation change in petroleum, natural gas and geological exploration drilling engineering.

Drilling stabilizer is made from a forged piece of 4145 H Mod material or non magnetic material, which is also an important tool to prevent deviation change in petroleum, natural gas and geological exploration drilling engineering.

The mechanical properties conforms to API Spec 7-1

There are Four basic structural types of drilling stabilizer

• Integral spiral drilling stabilizer

• Integral straight blade stabilizer

• Replaceable sleeve stabilizer

• Roller Stabilizer

Stabilizer Specification With Milled Blades
Size	Crown OD	Fishing Neck OD	ID	Fishing Neck Length	Crown Length	OAL	Blade width	Bevel angle		ARC
In	A	B	C	D	F	G	I	α	β	R
	in	in	in	in	in	in	in	°	°	in
8 1/2×6 1/2×2 13/16×100	8 1/2	6 1/2	2 13/16	30	18	100	2 1/2	30	30	4
12 1/4×8 1/4×2 13/16×100	12 1/4	8 1/4	2 13/16	30	18	100	3 1/2	30	30	4
12 1/4×8 1/2×2 13/16×100	12 1/4	8 1/2	3	30	18	100	3 1/2	30	30	4
14 3/4×9 1/2×3×100	14 3/4	9 1/2	3	30	20	100	3 1/2	30	30	4
16×9 1/2×3×100	16	9 1/2	3	30	20	100	4	30	30	4
17 1/2×9 1/2×3×100	17 1/2	9 1/2	3	30	20	100	4	30	30	4
22×9 1/2×3×116	22	9 1/2	3	30	24	116	4	45	30	4
26×9 1/2×3×116	26	9 1/2	3	30	24	116	4	45	30	4
28×9 1/2×3×122	28	9 1/2	3	30	20	122	4	30	30	4
32×9 1/2×3×122	32	9 1/2	3	30	20	122	5	30	30	5
36×9 1/2×3×133	36	9 1/2	3	30	20	133	5	45	30	5
Note: 1.The Size & warp angle can be designed according to customer's requirement 2. Non-magnetic stabilizer is also available upon request

 

TIPTOP Forging provide cost effective raw materials for BHA manufacturers,welcome your enquiries!